Posts Tagged ‘scuba training’

« Older Entries
Newer Entries »

Drama on the High seas.

Saturday, July 25th, 2009
The Lockness stopped by

Saturday, Divers Den North had a charter to the Stolt. Everybody loves this wreck. The drive out was spent weaving and dodging the flotilla of recreational boats. Apparently there was a fluke tournament, and the masses had turned out.

When we reached the Stolt, Terry jumped in to set the hook.  Watching him descend, it was obvious that surface vis looked much better than the week before.  However, when we pulled up a dragger had passed very close to the wreck.  This raised concerns about the piscina gonfiabile con scivolo vis on the bottom. Terry had us tied in quickly, and the pool was open.  As divers were rolling in, the Lockness arrived from Long Island, and asked to join us.  Before long they were tied in, with their boat just off our stern.  Captain Dan seems to know everyone.  We were soon exchanging stories of dives, trips, and artifacts.

Divers started returning with bags of scallops, bugs and mussels. A couple of nice tog came up also. From the reports the temperatures jumping castle had not changed much, but the visibility was just the opposite. of last week. It was clear on the surface, and only 10 feet or so on the wreck.

I rolled in with a student, and we headed for the bottom right along the break. The reports were accurate, the vis was bad, with some surge at the top of the wreck, and current past the hull. We did a quick tour of the break, then headed slowly up the super structure. We poked our heads in a few holes, but the vis was just as bad inside. One interesting observation was the number of scallops on top of the wreck, and on the flat surface of the superstructure.

The Coast Guard takes over the escort

While we were in the water, a boat in distress was reported in our area. We got underway quickly, and sped off to assist. Upon arrival, we could see that the boat was low in the water, but they had stopped taking on water. We escorted them toward shore until the Coast Guard arrived on scene. Nothing like a little drama on the high seas.

Tags: , ,
Posted in Dive Log, Instruction, North East Diving | No Comments »

SCUBA for the warm water diver

Wednesday, February 18th, 2009

Many divers live in tropical climates, or only dive when they travel to these climates. Up north they are often called Caribbean divers, or blue water divers. I prefer warm water divers, as many travel beyond the Caribbean, and blue water is often used in reference to very deep water.

Diving under these conditions can be both exciting, and relaxing! The scenes of tropical reefs and colorful fish are beautiful and serene. The diving is often easy and at many resorts it’s supervised. This is a great place for beginning divers to practice their new skills, and enjoy the wonders of underwater world.

Gear:
We previously talked about basic SCUBA gear, so now let’s add a few items for tropical diving.

Exposure protection:
This will be the major consideration. There are a few variables here:
Water temperature
Air temperature
Your bodies reaction to cold
How many dives are planned

Read the section on Exposure Protection for more details

Signals:
Tropical diving is often done around small islands. Sometimes in strong current. Separation for the boat is a real possibility, and signal devices can be real life savers! If your planning a drift dive, then will need a marker to let the boat know where you are. Inflatable Water Slide A visual aid like an SMB is ideal for both situations. Also a audible signal like a whistle, or Dive Alert can get the attention of the dive boat when you’re hard to see. Both of these can be easily carried in a BCD pocket.

Skills:

Buddy Skills: With all the fascinating beauty of the tropical reefs, it’s all too easy to become distracted and lose contact with your buddy. Try to stay within about 10 ft, and don’t forget to check on them regularly.

Depth Control: The clear water can be very deceiving. Remember objects appear closer under water. We can easily go deeper than planned, and run into issues with gas management, or decompression. Keep an eye on your gauges!

Buoyancy Control: Coral reefs are fragile environments! A single kick can kill an organism that has lived for 100 years. We as divers are fascinated by this spectacle, but we must protect it from ourselves. Work on your buoyancy. Practice it whenever you have a chance.

Tags: , ,
Posted in Basic SCUBA | No Comments »

SCUBA Exposure Protection

Wednesday, February 18th, 2009

In the process of diving, we are subjecting our bodies to an alien environment. This environment exposes our bodies to conditions that we are not accustom. Divers need protection in a few different forms:

  • Thermal protection: The major reason for protection is Thermal protection. Keep in mind that water conducts heat 25 times faster than air. In air, our bodies would be warm at 75 deg F. Underwater, most people would chill very quickly at 75 deg F. Our bodies can not tolerate a drop in temperature. Hypothermia develops after a drop of only a few degrees.
  • Abrasion protection: Rocks, shipwrecks, shells, corals can all easily scratch, or cut through exposed skin.
  • Marine organism protection: especially in tropical waters, there are many stinging organisms both on the reef, and floating in the water. Sea Urchins, scorpion fish, lion fish and a long list of others have sharp if not poisonous barbs that can easily hurt a diver.
  • Sun protection: While not as obvious, the sun in the tropics can burn sensitive skin on the deck of a boat, or even while we are snorkeling in the water.

The type of protection available breaks down into three groups:

  • Dive Skin: These provide no thermal protection, but do provide the other three. They are often made of Lycra to hold the suit close to the body and reduce drag.
  • Wetsuits: These are made of Neoprene rubber, which consists of thousands of small gas bubbles. The thicker the wetsuit, the more bubbles, and therefore the more thermal protection it provides. The thickness is measured in millimeters (mil) and varies form 0.5 – 7.0. A small amount of water enters the suit (hence the name) but the body quickly bouncy castle for sale warms this water, and the suit insulates it from the outside water. In order to work properly, they must be snug to prevent water from flushing through the suit and cooling the body.
  • Drysuits: These provide an airspace under the suit that can be inflated to provide protection. An undergarment holds the air in place around the body and reduces air movement to the highest part of the suit.

Which to use:

Since each diver responds differently to cold, it’s impossible to give an exact answer. Here are some factors that affect how much thermal protection is needed:

  • Water temp: Duh. Colder water will need more protection.
  • Depth: Often it is cooler down deep, and wetsuits will lose some of their protection as we go deeper.
  • Air temp: On an overcast day, it can be cooler in the air than under water.
  • The diver: Size, fitness, metabolism, even what was eaten for breakfast will all affect the reaction to cold.
  • Length of dive: Longer exposures will require more protection.
  • Number of dives: More dives done in a day or over a week can cool our bodies slowly.

There is no right suit for all divers under a given conditions. No one can say “you’ll be warm in a 3 mil suit at 80 deg F.”. However, here are some guidelines:

Dive skins are used in very warm water ( over 85 Deg F ). They have little to no thermal protection, but do provide a layer of protection from sun, scrapes, and stinging organisms. In tropical environments, this protection can be very important. Corals, sea urchins, and shells can cause punctures and abrasions. Also, the Caribbean sun can cause dangerous sunburn very quickly. If you don’t need the thermal protection, it’s still advisable to wear some form of dive skin.

If the water temperature is below 85 degrees, many people should consider a 3 mil wetsuit. At 80 degrees, many will wear a suit between 3-5 mil. On the other hand, some very cold people will where a 7mil suit. As the water get colder, the thickness of the suit can be increased.

Since water temperature varies throughout the year, it can be beneficial to consider layers. A 3 mil shorty can be worn over a 3 mil suit when the weather turns cold. Or, a hooded vest can be warn under a suit to keep the core warm.

Below about 60 Deg F, many people are thinking drysuit. Some will stay with a wetsuit as long as possible due to the cost of a drysuit. For longer dives in colder water, drysuits are heaven sent. With a drysuit, dives under the ice in lakes are possible. To handle cooler temperatures in a drysuit, the undergarment thickness is increased to create a larger air space around the diver. Some exotic materials are often used in the undergarment provide more thermal protection for the same size air space.

Unfortunately, when discussing thermal protection, there is no right answer. It all depends on the diver, and trial and error may be the best approach. One parting point: If you’re warm, you can flush water through the suit, or remove your hood to cool off. If you’re cold, you have to end the dive to warm up. It’s better to error toward the warm side.

Tags: , ,
Posted in Basic SCUBA | 2 Comments »

Points to consider when buying dive gear

Sunday, January 25th, 2009

Any basic SCUBA class will tell you that the primary consideration when buying gear is fit. If it does not fit right, it will not function properly. The best example is the simple SCUBA mask. If it does not fit, it will leak, and fill with water. This not only defeats the purpose, but also adds a great deal of stress to the diver. Make sure your gear fits!

After fit, here are some other considerations you may want to keep in mind when making gear selection.

Intended use: Ask yourself a serious question: what type of diving will you be doing in 5 years? Your SCUBA gear will easily last that long. I still regularly dive the first SCUBA regulator I ever bought. Many fall victim of short sighted purchases. Then every few years, they sell all their gear, and buy gear that is better suited to the diving they are doing now.

Marketing claims: The newest or most expensive model is not always the best choice. Manufacturers are constantly trying to separate themselves from the others. Inflatable Water Slide There have not been huge changes in SCUBA technology in the last few years. Improvements in manufacturing practices have reduced the cost to make the gear, and exotic materials have made some of the gear more rugged. However, despite marketing claims, the basic function of the gear has not changed significantly.

Local Conditions: Ask a few local divers, or instructors, what type of gear they use and why. There are a few pitfalls to this approach. If their answer is one of the following, “it was a deal”, “someone else recommended it” or “That’s what our shop sells”, then look for another source. Keep in mind that shops recommend what they sell. That does not mean its the right gear for your local diving. Check out the diving experience of the shop owner (the one who purchases the gear). Make sure their diving matches your plans. If not, then the gear may not be suited to your diving conditions.

A good instructor will usually be upfront, but some are affiliated with a shop, and will promote the shop’s gear. Experienced divers will get the right gear for the job. Find out what it is and why.

Shop for features not brands: When talking with other divers, ask about the features they look for in the gear. During these discussions, leave the brand out of it. Most brands offer similar features. Or put another way, the features you’re looking for are probably available from several brands. The important part is to determine which features are important, and which are not. Some features, highly touted by the marketing types, may be a detriment in your diving conditions. Make a list of the features you want before stepping into the shop.

Which brand: Again, most features are available from several brands. How do we choose? Without going into the Chevy vs Ford issue, here are a few points to ponder:

  • Service: Some brands provide fantastic gear, but have very few locations for service.
  • Quality: Some brands have better manufacturing processes, and produce gear with better fit and finish.
  • Reliability: This often has to do with the quality of the materials used in the gear, and the quality of the engineering that went into it. Simple is usually more reliable.

Price: Why is this last on my list? Simple, if you have not chosen good gear, then getting a good deal, is no deal at all. I hope the above discussions will prevent you from purchasing the wrong gear, or falling for the marketing claims and purchasing unnecessary bells and whistles. If you can avoid those pitfalls, then you should have saved enough money to buy the right gear once.

Tags: , ,
Posted in Basic SCUBA, North East Diving | 1 Comment »

How long can you stay underwater on SCUBA?

Wednesday, January 14th, 2009

The final question everyone asks.   Unfortunately, there is no short answer to this question, and the usual response is: it all depends.  After the strange looks, I start to explain some physics and physiology, and lose most people after a few sentences.

Let’s start out by changing the question.  Why do you get out of the water?  Without getting too deep into the physics / physiology and finances, we have one of several reasons:
1)   Limited ability to withstand the temperature drain of water immersion
2)   Limits on the amount of gas we have
3)   Large fish with teeth

Normally, 1 and 2 are the major limiting factors. Inflatable Water Slide When the original question is posed, it is usually referring to our gas limits, so let’s look closer at the factors affecting it.

Without getting too deep into the explanation, lets just use a couple of generalizations.
1)  The deeper you go, the less time you have.
2)   The harder you work (underwater) the less time you have.
3)   Different people consume air at different rates.
4)   The bigger you are, the less time you will have.
5)   New divers will have less time than experienced divers.

Numbers 1 and 2 are immutable facts.  Numbers 3 – 5 are generalizations that vary greatly based on the individual, their physical fitness, and level of skill and comfort in the water.

Just to throw a wrench into the works, we must also consider the size of the tank.   As discussed before, different tanks carry different amounts of gas, and can allow us to stay longer.

Let’s consider an average dive (not working hard), by an average diver at an average depth (60 ft) with the average tank (Aluminum 80).  In general this diver should have gas to dive for about an  hour.

Tags: ,
Posted in Basic SCUBA | 5 Comments »

« Older Entries
Newer Entries »